Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the rear headlight of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

The steps to remove the rear light of the Volkswagen Golf model MK 7 are simple and quick to perform independently and do not require the use of any tools. To remove the light, we need to open the trunk and remove the side carpet located at the light.

After removing the carpet, unscrew the butterfly nut that locks the light by turning it counterclockwise. Remove the light and disconnect the connector, then remove the light from its housing.

After removing the light, perform any desired maintenance and inspection work; installation follows the reverse process.


Posted on 10 June 2025 by ScegliAuto


Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Is the rear headlamp of your Volkswagen Golf 4 damaged and needs replacing? Here’s how to remove it. Open the boot lid, remove the side fabric cover,…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below, you will find instructions on how to remove and replace the rear light and its bulbs on a Volkswagen Golf. First, open the rear hatch and star…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Is the rear headlamp of your Volkswagen Golf 6 due for replacement? Here’s how to remove it. Open the boot lid, remove the side fabric cover, and acc…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos