Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Rear Window Mechanism on a Volkswagen Golf?

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

In this tutorial, learn how to dismantle the rear window mechanism on a Volkswagen Golf. First, open the relevant door, then remove the inner edge cover and unscrew the screws underneath it. Next, unscrew the hinge bolts, the lock bolt, and remove the lock from the handle. Once done, disconnect the control cable and remove the front panel of the door. You will then have access to the mechanism, which can be dismantled by removing the respective bolts.

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The window regulator fuse on your Volkswagen Golf is located inside the fuse box. The fuse box is situated within the cabin, on the left side of the …
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) This video shows the main steps to remove and replace the window regulator motor on a Volkswagen Golf Mk3. First, open the front door and remove the …
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) In this tutorial, you can see how to remove the rear door panel on a Volkswagen Golf to replace the damaged lock, window regulator mechanism, etc. Fi…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos