Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Light Unit

Model: Volkswagen Polo Polo VI, Polo 6, MK 6, AW1, MK VI - Years 2017-2025
Part: Interior dome light bulb

This video shows the procedure, as well as describing it verbally, for removing the internal light unit of the car in case you want to replace the bulb. Use a plastic lever to gently pry the plastic cover loose. At this point, to remove it, use a screwdriver on the front to disengage the clips that hold it to the car roof, taking care not to break or deform them. Once done, you will reach the compartment where the bulb is housed, making it easy to replace it. Operation complete.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light and Bulb of the Volkswagen Polo
How to Replace the Interior Light and Bulb of the Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Follow the steps below to remove and replace the interior light and its bulb in the Volkswagen Polo. First, get in the vehicle and start by removing …
How to Change the Interior Bulbs on a 2018 Volkswagen Polo?
How to Change the Interior Bulbs on a 2018 Volkswagen Polo?
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) The video author explains how to replace the interior lights (or courtesy lights) of the 2018 Volkswagen Polo. First, remove the ceiling light by gra…
How to Replace the Courtesy Lights of the Volkswagen Polo?
How to Replace the Courtesy Lights of the Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To replace the courtesy lights of the Volkswagen Polo, remove the plastic cover located in front of the buttons to turn on the lights. To do this, si…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos