Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light Fitting on the Volkswagen Polo 6R

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Interior dome light bulb

See other generations:
Video tutorial

In today's video, you will see how to remove the interior light fitting and replace the bulb on the Volkswagen Polo third series (6R), as well as on the Volkswagen Up, in simple and quick steps. First, get in the vehicle and start by removing the light fitting; to do this, pry at the sides with something thin, as shown in the video.

Now you can remove the bulb that you find inside, replacing it with the new one; then refit and securely attach the light fitting, following the video until the end!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Interior Light and Bulb of the Volkswagen Polo
How to Replace the Interior Light and Bulb of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Follow the steps below to remove and replace the interior light and its bulb in the Volkswagen Polo. First, get in the vehicle and start by removing …
How to disassemble the dome light of the interior lights of the Volkswagen Polo
How to disassemble the dome light of the interior lights of the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today we will explain how to disassemble the interior light fixture on a Volkswagen Polo model 9. To disassemble the fixture, we need to remove the p…
How to Reset the Tyre Pressure Warning Light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the tyre pressure warning light on the Volkswagen Polo, turn on the instrument cluster by turning the key in the ignition switch: once it is…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos