Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

In this tutorial, you will see how to replace the external wing mirror on a Volkswagen Golf, which requires removing the door panel. First, remove the cover of the handle, then unscrew the two screws underneath and rotate the bolt inside the lower slot 90 degrees counterclockwise.

Once done, use a plastic spatula to completely disengage the panel from the door and disconnect the mirror connector. Finally, unscrew the two fixing bolts and remove the mirror.

To fit the replacement, follow the reverse procedure.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

How to Remove the External Mirror from a Volkswagen Golf Mk6
How to Remove the External Mirror from a Volkswagen Golf Mk6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) How to remove the external mirror from a Volkswagen Golf Mk6? Follow these steps: use a plastic or rubber trim removal tool to pry between the mirror…
How to Remove the Exterior Wing Mirror on Volkswagen Golf Mk4
How to Remove the Exterior Wing Mirror on Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this short video, follow the steps to remove the exterior wing mirror on a Volkswagen Golf Mk4. First, open the front door and start by removing t…
How to replace the exterior rearview mirror on a Volkswagen Golf?
How to replace the exterior rearview mirror on a Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, we will see how to replace the external rearview mirror on a Volkswagen Golf, a process that is extremely simple and quick. First, …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos