Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Flap on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuel cap

See other generations:
Video tutorial

To open the fuel flap on a Volkswagen Polo, press the designated button inside the cabin located on the centre console: pressing this button will unlock the flap and provide access to the cap underneath. The cap can be unscrewed by inserting the ignition key into the corresponding lock to unlock it. At this point, simply turn the cap counter-clockwise to remove it, allowing access to the fuel filler.

Finally, screw the cap back on and close the flap.


Updated on 6 June 2026 by ScegliAuto


Related tutorials

How do you replace the fuel door of the Volkswagen Polo?
How do you replace the fuel door of the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the fuel door of the Volkswagen Polo, you will first need to open it to access its internal part: here you will find the access cap to the…
How to replace the fuel flap on the Volkswagen Polo?
How to replace the fuel flap on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To replace the fuel flap on the Volkswagen Polo, open the flap by applying slight pressure to the left side: this will allow access to the screw that…
How to Open the Fuel Filler Flap on a Volkswagen Polo 9N1?
How to Open the Fuel Filler Flap on a Volkswagen Polo 9N1?
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To manually open the fuel filler flap on a stuck Volkswagen Polo 9N1, lift the rear bonnet and then raise the side carpet in the boot, on the side wh…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos