Do it yourself
Frequently asked questions about cars and motorcycles

Underbody Inspection Instructions

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Checks and maintenance

Whenever you perform regular maintenance or have the opportunity to lift the vehicle on a ramp, it is always advisable to inspect the underbody to check the integrity of certain elements that are often overlooked. Check the condition of the support rubbers for the exhaust pipe, the welds, the joints, and any presence of holes or rust on the exhaust pipe itself; ensure there are no leaks from various pipes such as the fuel or brake lines; inspect the shock absorbers to ensure they are not leaking oil, and finally, check the secure fitting of any cover plates or plastic elements that could cause vibrations.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset the inspection light on a Volkswagen Golf VII, use the "0.0" or "SET" button on the dashboard. With the ignition off, press and hold this bu…
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today we will see the instructions that will allow us to reset the inspection (service) light of the Volkswagen Golf and Golf Plus. First, let's get …
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Briefly, we will see the instructions that will allow us to reset the inspection (service) warning for the Volkswagen Golf. First, we get inside the …

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos