Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Valve Stem Seal Replacement

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Engine

Replacing the valve stem seal is a rather demanding task that requires a basic understanding of mechanics. It is a delicate operation that requires some manual dexterity. Use a puller on the valve stem seal, applying a rotational and pulling motion. Insert the fitting to facilitate the removal of the valve stem seal. The new seal should be lubricated and positioned on the stem, applying pressure using a Torx screwdriver fitting.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Valve Stem
Replacing the Valve Stem
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Your car requires regular maintenance on every small part, including the valve stem seals. With some mechanical knowledge, plenty of patience, dexter…
Fuel Tank Breather Valve
Fuel Tank Breather Valve
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Near the fuel tank filler neck, there is a breather valve that, when pressed, allows trapped air in the tank to escape during filling, thus enabling …
Replacing the Thermostat on a Golf
Replacing the Thermostat on a Golf
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Is the thermostat on your Golf damaged? Follow these steps to remove the thermostat inside the engine bay. Lift the front bonnet of the car and ident…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos