Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter in a Volkswagen Golf is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for the engine to cool down, then open the bonnet and locate the airbox situated just behind the left headlamp.

Once done, unscrew all the bolts around the perimeter of the box using a Torx T25 key, remove the upper half, and disconnect the front duct. At this point, simply extract the old filter, clean the housing of any debris, and fit the replacement by following the reverse procedure.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Volkswagen Golf 7
How to Replace the Air Filter on a Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This short video tutorial shows how to replace the air filter on a seventh-generation Volkswagen Golf, produced from 2012 to 2019. First, disconnect …
How to Replace the Air Filter on the VW Golf 4
How to Replace the Air Filter on the VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide explains how to replace the air filter on a Volkswagen Golf model 4. Start the replacement by opening the front bonnet and then disconnect…
How to Replace the Air Filter on a VW Golf 7
How to Replace the Air Filter on a VW Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The air filter on a Volkswagen Golf model mk7 is located under the front bonnet, specifically on the right side near the air duct and engine. To repl…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos