Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat in the Volkswagen Passat?

Model: Volkswagen Passat 3BG, B5 - Years 1996-2005
Part: Seat

In this tutorial, you will see how to remove the rear seat in the Volkswagen Passat, a very simple and quick operation. First, remove the indicated cover using a flathead screwdriver, then unscrew the two screws, lift the seat base, and release the locks on the hinges. Once done, remove the pins from the hinges and take the seat base out of the cabin. For the backrest, simply unscrew the fixing bolts accessible from the boot. Finally, follow the reverse procedure to install any replacement parts.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear seat of the Volkswagen Passat
How to disassemble the rear seat of the Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) The following steps will illustrate the procedure for disassembling the rear seat and backrest of the Volkswagen Passat. First, open the rear doors o…
How to Remove the Front Seat from a Volkswagen Passat
How to Remove the Front Seat from a Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) How to remove the front seat from a Volkswagen Passat? This video explains how to proceed. First, move the seat forward (using the electric buttons i…
How to remove the rear seat of a Volkswagen Passat
How to remove the rear seat of a Volkswagen Passat
Volkswagen Passat (2014-2023 / B8, 3G, MK 8) Today we will see the entire procedure necessary to disassemble the rear seat of a Volkswagen Passat, model B8 in production from 2014 to 2023. So fi…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos