Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Read Error Codes on a Volkswagen Fox

Model: Volkswagen Fox MK 1 - Years 2003-2011
Part: Warning light – error code

To read the error codes on a Volkswagen Fox, simply open the fuse cover located between the steering column and the driver’s door. In the centre, there is a socket to which you need to connect the appropriate cable and the OBD II reader. Naturally, you must turn on the ignition (without starting the engine) to view the stored errors on the ECU. You will also need a code reader, which can be found in the vehicle's user and maintenance manual. From the error code, you can determine the problem and then find the solution.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Engine Fuse Box of the Volkswagen Fox
Where to Find the Engine Fuse Box of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) If you own a first-generation Volkswagen Fox and need access to the engine fuse box, simply follow this guide and apply the described procedure. Firs…
Where to Find the Fuse Box of the Volkswagen Fox
Where to Find the Fuse Box of the Volkswagen Fox
Volkswagen Fox (2003-2011 / MK 1) To find the fuse box of your Volkswagen Fox (2003-2011) easily and safely, follow these simple steps. First, enter the cabin and ensure the car is co…
Where Are the Fuses Located on the Volkswagen Fox?
Where Are the Fuses Located on the Volkswagen Fox?
Volkswagen Fox (2015-2021 / MK 2) All fuses on the Volkswagen Fox are located within the designated fuse boxes installed in the vehicle: in this model, you can find two boxes containi…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos