Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Discs and Pads

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Brake rotors

See other generations:
Video tutorial

Lift the vehicle on suitable axle stands and remove the front wheel (loosen the bolts before lifting); remove the protective caps and unscrew the bolts securing the brake caliper, use a lever between the pads to slightly retract the piston and complete the removal of the caliper by taking out the old pads and fully retracting the piston with the appropriate tool; then remove the disc retaining bolt, clean the corresponding seat on the hub applying grease and install the new disc; insert the new pads and refit the brake caliper.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Front Brake Disc and Pad Replacement
Front Brake Disc and Pad Replacement
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Lift the vehicle on suitable axle stands and remove the front wheels; remove the protective caps from the brake caliper mounting bolts and unscrew th…
Replacing the Rear Brake Discs on a Polo 9N
Replacing the Rear Brake Discs on a Polo 9N
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Want to replace the rear brake disc on your Polo? Here’s how to remove the disc from the rear of the car. Lift the vehicle with a jack and remove the…
What does it mean when the brake warning light comes on in a Volkswagen Polo?
What does it mean when the brake warning light comes on in a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In the Volkswagen Polo, the brake fluid reservoir is located right above the brake pump, on the left side of the engine compartment. The level can be…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos