|
Do it yourself
| |||
| ||||
What does it mean when the brake warning light comes on in a Volkswagen Polo?
Model: Volkswagen Polo
Polo 5, Polo V, MK 5, MK V, 6R
- Years 2009-2017
In the Volkswagen Polo, the brake fluid reservoir is located right above the brake pump, on the left side of the engine compartment. The level can be seen by unscrewing the cap, or by shining a light behind the reservoir, and in this way we can see if the level is close to the maximum. If the brake warning light comes on - and it's not because the handbrake is engaged - then it means that the level is dropping and we need to question why the level has dropped. There could be a leak in the system or the issue could be with the brake pads or discs wearing down. It is advisable to restore the brake fluid level, without forgetting to inspect both components as soon as possible.
Posted on 28 September 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Polo
(2001-2009 /
MK IV, Polo IV, Polo 4, MK 4, 9N)
To adjust the handbrake on the Volkswagen Polo, first lift the car using a jack. Once the car is off the ground, remove the left rear wheel and take …
Volkswagen Polo
(2001-2009 /
MK IV, Polo IV, Polo 4, MK 4, 9N)
The handbrake adjustment of the Volkswagen Polo can be done by levering with an object to detach the cover of the central tunnel, located just behind…
Volkswagen Polo
(2009-2017 /
Polo 5, Polo V, MK 5, MK V, 6R)
To adjust the handbrake on the Volkswagen Polo, use a tool to pry off the cover of the storage compartment located in front of the handbrake. Once th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.087
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |