Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the high beams in the Volkswagen Polo?

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight

See other generations:
Video tutorial

In this tutorial, we can see how to activate the high beams in the Volkswagen Polo, a very simple operation that is not different from the typical procedure of most vehicles. First of all, let's go inside the car, then insert the key and turn on the instrument panel.

Next, we locate the left control lever and push it towards the front of the car. In the instrument panel, we can now see the light indicating the activation of the high beams. To deactivate them, simply pull the lever towards us, while pulling it further will allow us to flash the high beams.


Posted on 21 October 2025 by ScegliAuto


Related tutorials

How to activate and deactivate the high beams of a VW Polo?
How to activate and deactivate the high beams of a VW Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today, we will explain how to activate and deactivate the high beams on a Volkswagen Polo V. To perform this operation, you must turn on the vehicle'…
How to remove the headlight switch button on the Volkswagen Polo
How to remove the headlight switch button on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) To remove the button for turning the headlights on and off on the Volkswagen Polo model 9n, you need to rotate the knob towards the centre at the mar…
How to Recognise the Various Warning Lights on a Volkswagen Polo
How to Recognise the Various Warning Lights on a Volkswagen Polo
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Turn on the instrument cluster and begin following the description provided in the video for each warning light that appears on the display. As soon …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos