Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Car Wiper Blades

Model: Volkswagen Polo MK III, Polo III, Polo 3, MK 3, 6N - Years 1994-2003
Part: Windshield wipers

Changing the wiper blades on your car is a maintenance task that is not very complicated to carry out. First, you will need to purchase new wiper blades of the correct size. Then proceed to replace the old blades. First, lift the wiper arm and remove the part that needs to be replaced, then press the two release levers that will allow you to slide the blade off easily without widening the wiper tracks too much and causing instability, risking to compromise the cleanliness of the windscreen.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Motor on a Volkswagen Polo?
How to Replace the Wiper Motor on a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) To replace the wiper motor on a Volkswagen Polo, loosen the central nuts that secure the wiper arms so they can be removed. After removing the wiper …
Replacing Front Wipers on Volkswagen Polo
Replacing Front Wipers on Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this very simple video, you will learn how to remove and replace the front wipers on a Volkswagen Polo. First, lift the wipers and to remove them,…
Removing the Wiper Motor from a Volkswagen Polo
Removing the Wiper Motor from a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Below are the instructions that will allow you to remove and replace the wiper motor on a Volkswagen Polo. First, open the bonnet of the vehicle and …

    Frequently Asked Questions

    • Polo 2009-2017 - Why won't the Volkswagen Polo wipers turn off? Read answer
    • Polo 2017-2025 - What is the fuse that regulates the wiper water on the Volkswagen Polo 2018? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos