Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the instrument cluster from the Volkswagen Golf 7?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Instrument cluster

See other generations:
Video tutorial

To remove the instrument cluster from the Volkswagen Golf 7, detach the plastic covers surrounding the radio and the air vent to the left of the instrument cluster. Once these two covers are removed, you can unscrew the screws underneath that secure the instrument cluster.

This way, the unit can be pulled out from its housing by disconnecting the connector at the back. After removing the old instrument cluster, connect the new one, securing it with the screws inside its housing.


Updated on 16 June 2026 by ScegliAuto


Related tutorials

How to reset the "Service" light on a Volkswagen Golf?
How to reset the "Service" light on a Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset the "Service" light on a Volkswagen Golf, start by turning on the instrument panel without starting the engine. Use the button located below…
How to Dismantle the Instrument Cluster of a Volkswagen Golf
How to Dismantle the Instrument Cluster of a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this guide, you will see the steps to dismantle and remove the instrument cluster of a Volkswagen Golf. First, get inside the vehicle and start by…
How to Replace the Instrument Cluster Display on a Volkswagen Golf
How to Replace the Instrument Cluster Display on a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The instructions in this guide will allow you to remove and replace the display of the instrument cluster on a Volkswagen Golf. First, get inside the…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos