Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Gear Knob and Gaiter of the Volkswagen Golf DSG

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Shift knob

In this tutorial, learn how to remove and replace the gear knob and gaiter of the Volkswagen Golf. First, get inside the vehicle and start by removing the base of the gear gaiter, disconnecting it and unplugging the connector underneath; then remove the plastic parts of the gear knob to take it off, as shown in the video. Next, detach the gaiter from the knob; now replace and refit the gear gaiter, assembling the knob parts afterwards, following the tutorial until the end!

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the DSG Gear Knob in the Volkswagen Golf?
How to Replace the DSG Gear Knob in the Volkswagen Golf?
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) In this tutorial, you will see how to replace the DSG gear knob in the Volkswagen Golf, a very simple and quick operation. First, go inside the cabin…
How to Remove the Gear Knob of a Golf
How to Remove the Gear Knob of a Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) How to remove the gear knob of a Golf? Here’s how to remove the gear knob and gaiter. Use a plastic lever to detach the leather gaiter frame, then re…
Replacing the Gear Knob of the Volkswagen Golf GTI
Replacing the Gear Knob of the Volkswagen Golf GTI
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) In this brief and simple guide, follow the instructions to remove and replace the gear knob and gaiter of the Volkswagen Golf GTI. First, get inside …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos