Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Polo
    4. : How to reset the service warning light in the 2020 Volkswagen Polo GTI

Volkswagen Polo - Video tutorial

Model: Volkswagen Polo Polo 6, MK VI, AW1, MK 6, Polo VI - Years 2017-2024
Part: -board computer
Operation: How to reset the service warning light in the 2020 Volkswagen Polo GTI

In this video tutorial we can see how it is possible to reset the service warning light in the 2020 Volkswagen Polo GTI, following a few simple steps: the first thing to do is vehicle maintenance, such as changing the engine oil and filters; after performing the do-it-yourself service, we have to get in the car, turn on the ignition, without turning on the engine, enter the settings menu and scroll until you find the item: "interval", then press Ok (the interval must remain in the center of the screen); now hold down the OK button on the steering wheel for about 10 seconds and after about 10 seconds select the item "Reset oil service?" on the display, then press Ok and the reset has been performed. Then return to the menu and select: "Reset inspection?" And keep the OK key pressed to confirm the inspection reset.


Posted on 13 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Polo 2009-2017 - What does the engine malfunction warning light on the Volkswagen Polo mean? Read Answer
    • Polo 2017-2025 - What to do if voice control on the Volkswagen Polo is not available? Read Answer
    • Polo 2017-2025 - Why does the center display of the Volkswagen Polo 6 not work? Read Answer
    • Polo 2009-2017 - How to reset the tire warning light in a Wolksvagen Polo? Read Answer
    • Polo 2009-2017 - What does the Volkswagen Polo "Insp" light mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos