Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the AdBlue Countdown on a Volkswagen Transporter T6 with an Autel Tool

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: AdBlue warning light

See other generations:
Video tutorial

To reset the AdBlue level countdown, follow this procedure: connect the Autel tool to the vehicle's diagnostic port, the tool's display will show a prompt to continue, then click "OK" at the bottom. Next, click on "Basic Settings" and scroll until you find "Reset SCR Lock" and click on it. Then, click "Start" and wait for the data transfer with the vehicle; after that, you will see the message "Basic Setting Completed". At this point, the AdBlue countdown warning will have been cleared.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to reset the AdBlue warning light on the Volkswagen Transporter?
How to reset the AdBlue warning light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) To reset the AdBlue warning light on the Volkswagen Transporter, first top up the fluid by adding the additive to the designated tank: the vent for t…
How to reset the AdBlue warning light on the Volkswagen Transporter?
How to reset the AdBlue warning light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) To turn off the AdBlue warning light on the instrument panel of the Volkswagen Transporter, top up the fluid by adding the additive to the relevant t…
How to Reset the AdBlue Light on a Volkswagen Transporter?
How to Reset the AdBlue Light on a Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) The AdBlue light on the Volkswagen Transporter indicates that the additional fluid in the tank is nearly depleted: therefore, you can reset the light…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos