Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue warning light on the Volkswagen Transporter?

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: AdBlue warning light

See other generations:
Video tutorial

To reset the AdBlue warning light on the Volkswagen Transporter, first top up the fluid by adding the additive to the designated tank: the vent for this tank is located just below the fuel tank. To access it, simply open the fuel flap and locate the blue cap inside: by opening the cap, you can top up with the necessary amount of fluid.

This will completely turn off the AdBlue warning light, allowing you to switch off the ignition.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Remove the AdBlue Warning Light in a Volkswagen Transporter?
How to Remove the AdBlue Warning Light in a Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) In the Volkswagen Transporter T6, to remove the AdBlue warning light, simply top up the fluid. In this tutorial, you will see how to proceed. First, …
How to Properly Refill AdBlue in the Volkswagen Transporter
How to Properly Refill AdBlue in the Volkswagen Transporter
Volkswagen Transporter (2014-2025 / T6, MK 6) Before discovering how to correctly refill AdBlue in the Volkswagen Transporter T6, remember that this operation must be carried out with the engine …
How do you reset the AdBlue warning light on the Volkswagen Transporter?
How do you reset the AdBlue warning light on the Volkswagen Transporter?
Volkswagen Transporter (2014-2025 / T6, MK 6) It will be possible to make the AdBlue warning light of the Volkswagen Transporter disappear by topping up the fluid, inserting the additional fluid …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos