Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Volkswagen Polo

Model: Volkswagen Polo MK IV, Polo IV, Polo 4, MK 4, 9N - Years 2001-2009
Part: Timing belt

In today's video, you will learn how to replace the timing belts on a Volkswagen Polo from the early 2000s. First, lift your vehicle on a ramp. It is advisable to work only on a cold vehicle, as you will be working near the engine. Identify the auxiliary belt that you want to replace. Then proceed to remove it by detaching it from the relevant pulley. It is also recommended to replace the corresponding water pump. Fit the new unit and check all fastenings to ensure they are properly tightened. Finish the job.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

When and How to Replace the Timing Belt on the Volkswagen Polo 1.4 MPI
When and How to Replace the Timing Belt on the Volkswagen Polo 1.4 MPI
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this guide, you will find the main instructions for removing and replacing the timing belt on the Volkswagen Polo 1.4 MPI; for this type of engine…
Guide to Replacing the Timing Belt on a Volkswagen Polo 1.2
Guide to Replacing the Timing Belt on a Volkswagen Polo 1.2
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) This guide provides the necessary instructions on how and when to replace the timing belt on a Volkswagen Polo 1.2 3-cylinder engine. For this type o…
Replacing the Timing Belt on a Volkswagen Polo 1.4
Replacing the Timing Belt on a Volkswagen Polo 1.4
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) This guide outlines the main steps to remove and replace the timing belt on a Volkswagen Polo with a 1.4 petrol engine. First, lift the vehicle and r…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - How much does it cost to replace the timing chain of the Volkswagen Polo 1.2 petrol? Read answer

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos