Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Front Headlamp Bulb on a Volkswagen Jetta

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

If you need to replace a blown front headlamp bulb on your vehicle, follow these instructions: First, open the bonnet and locate the headlamp with the blown bulb. Reach behind the headlamp to find the power connector, which needs to be disconnected.

Below it, there is a plastic cover that must be unscrewed. Next, locate the bulb housing, which is secured by a clip that needs to be pressed to open it, allowing you to extract the bulb.

Take the new bulb and position it in the housing, reattach the clip, remount the plastic cover, and reconnect the connector.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb of the Volkswagen Jetta 6
How to Replace the Headlight Bulb of the Volkswagen Jetta 6
Volkswagen Jetta (2010-2018 / MK 6, A6) If you own a Volkswagen Jetta Mk6 and want to learn how to correctly replace the headlight bulb, simply follow all the steps described in this guide.…
How to replace the headlight bulb of the Volkswagen Jetta 5
How to replace the headlight bulb of the Volkswagen Jetta 5
Volkswagen Jetta (2005-2010 / MK 5, A5) If you own a Volkswagen Jetta Mk5 and want to find out the steps you need to take to safely replace the front headlight bulb, all you have to do is r…
How to Replace the Headlamp Bulb of the Volkswagen Jetta?
How to Replace the Headlamp Bulb of the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To replace the headlamp bulb of the Volkswagen Jetta, open the bonnet to access the components at the rear of the corresponding headlamp. Disconnect …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos