Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Starter motor

See other generations:
Video tutorial

To remove the starter motor, first disconnect the cables and remove the battery. Then, also remove the battery tray.

Unscrew the nut and disconnect the negative cable from the battery to the starter solenoid. Now unclip and disconnect the other cable.

To work more comfortably, create some space by moving the surrounding cables. Loosen and partially unscrew the upper mounting nut. For easier access, you can lift the car, always adhering to safety regulations.

At the bottom, first unscrew the power steering pipe support. Now you can unscrew the starter motor mounting nut. At this point, simply remove the upper nut and extract the starter motor.

Car model: Volkswagen Golf 1.9 TDI Required tools: flathead screwdriver, socket wrench with extensions 10/13/16 mm.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Volkswagen Golf
How to Replace the Starter Motor on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Before starting, open the bonnet of your Volkswagen Golf. The starter motor is located at the lower right side of the engine block. Begin by removing…
How to Remove the Starter Motor from a Volkswagen Golf
How to Remove the Starter Motor from a Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Before you begin, open the bonnet of your Volkswagen Golf. Start by disconnecting the two battery terminals, then remove the battery itself. Next, re…
How to Remove the Starter Motor on a VW Golf 4
How to Remove the Starter Motor on a VW Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Learn how to remove the starter motor from a Volkswagen Golf 4. After removing the engine cover from the car, locate the starter motor. Disconnect th…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos