|
Do it yourself
| |||
| ||||
How to Replace the Ignition Cylinder in a Volkswagen Golf?
Model: Volkswagen Golf
MK 2, Golf 2
- Years 1983-1992
In this tutorial, you will see how to replace the ignition cylinder in a Volkswagen Golf, a straightforward operation that requires good manual skills. First, ensure the vehicle is off, then disconnect the negative terminal of the battery, unclip the central cover of the steering wheel, and undo the large central nut. Next, remove the steering wheel from the steering column, unscrew the three indicated screws, and remove the control lever module. At this point, drill a hole in the indicated position, about 12 mm from the plastic edge, then insert a small screwdriver into it and unlock the retaining clip of the cylinder. Once extracted, insert the replacement and reassemble everything.
Updated on 29 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
In this tutorial, you will see how to remove the ignition cylinder from the Volkswagen Golf. Before proceeding, disconnect the negative terminal of t…
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
Today, we will see the main instructions on how to dismantle and replace the ignition barrel on the Volkswagen Golf. First, open the bonnet of the ve…
Volkswagen Golf
(1983-1992 /
MK 2, Golf 2)
To replace the brake cylinder on a Volkswagen Golf, open the bonnet to access the components in the engine compartment: the cylinder is located at th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |