Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Lock and Ignition Cylinder on the Volkswagen Golf 4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

See other generations:
Video tutorial

Discover how to remove and replace the steering lock and ignition cylinder on the fourth generation Volkswagen Golf, as well as the Jetta. First, get inside the vehicle and start by removing the steering wheel along with its airbag; then remove the two plastic clips found on the cylinder, as shown in the video.

Next, disconnect the wiring and electrical connector, and extract the entire steering lock by unscrewing all the bolts with a 9 mm and 13 mm spanner; finally, reassemble everything, following the video to the end!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Lock or Ignition Cylinder from the Volkswagen Golf
How to Remove the Steering Lock or Ignition Cylinder from the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) This guide provides step-by-step instructions to remove and replace the ignition lock cylinder of the Volkswagen Golf. First, get into the vehicle an…
Removing the Ignition Barrel on a Volkswagen Golf 4 - Bora
Removing the Ignition Barrel on a Volkswagen Golf 4 - Bora
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In this video, you will see how to remove and replace the ignition barrel on the fourth generation Volkswagen Golf, as well as on the Bora and Jetta.…
How to Remove the Ignition Lock Cylinder on the Volkswagen Golf 5
How to Remove the Ignition Lock Cylinder on the Volkswagen Golf 5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, you will see how to dismantle and replace the ignition lock cylinder on the fifth generation Volkswagen Golf. First, disconne…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos