Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Oil Service Light on a Volkswagen Polo?

Model: Volkswagen Polo MK 6, Polo 6, AW1, MK VI, Polo VI - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the oil service light on a Volkswagen Polo, a very simple and quick operation that should only be performed after completing all required scheduled maintenance tasks. First, enter the cabin and insert the key, then press and hold the left button on the dashboard while simultaneously turning on the ignition.

Release the button when the confirmation message appears on the display and press it one last time to complete the procedure. Restart the vehicle and check that the reset has been successful.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service on a Volkswagen Polo?
How to Reset the Oil Service on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Resetting the oil service on a Volkswagen Polo, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that…
How to Reset the Airbag Light on the Volkswagen Polo
How to Reset the Airbag Light on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Briefly review the instructions that will allow you to reset the airbag light on the Volkswagen Polo by following these simple steps. To reset the ai…
How to reset the tyre pressure warning light on the Volkswagen Polo?
How to reset the tyre pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the tyre pressure warning light on the Volkswagen Polo, first inflate the tyres to the correct pressure: once the tyres are inflated, open t…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos