Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the number plate bulb on a Volkswagen Polo 5

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: License plate light

If the number plate bulb on your Volkswagen Polo fifth generation (2009-2017) is no longer working and you want to replace it yourself, follow these simple steps. First, park your Polo safely on a flat surface and turn it off completely. Next, go to the outside area and pull the light outwards. Disconnect it from the electrical pin and connect the new light to the same pin. Finally, position it correctly and you are done. Just test its operation by starting the car.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the dipped beam bulb on a Volkswagen Polo
Replacing the dipped beam bulb on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) In this very short video tutorial, you can see how to replace the dipped beam bulb (H7) on a fourth-generation Volkswagen Polo, model 9N produced fro…
How to replace the front turn signal bulb of the Volkswagen Polo 6N.
How to replace the front turn signal bulb of the Volkswagen Polo 6N.
Volkswagen Polo (1994-2003 / MK III, Polo III, Polo 3, MK 3, 6N) In the following guide dedicated to all of you who own a Volkswagen Polo 6N (year 2000), we will explain how you can complete the replacement of the …
How to Replace the Front Headlight Bulb of a Volkswagen Polo?
How to Replace the Front Headlight Bulb of a Volkswagen Polo?
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Good morning! Today, replace the front headlight bulb of your Volkswagen Polo. Start by opening the front bonnet. Next, unscrew and remove the rear c…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos