Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Volkswagen Tiguan?

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

To replace the rear light on the vehicle, follow the instructions below and refer to the video, as the operations are quite simple. First, open the boot.

On the closure profile of the boot, near the light, there are screws. Use a screwdriver to remove the two screws that secure the light unit.

Once the screws are removed, pull the light towards you. Be careful to disconnect the electrical connector located at the back.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light on the Volkswagen Tiguan
Replacing the Rear Light on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Let's look at the instructions that will guide us through the process of dismantling and replacing the rear light on the Volkswagen Tiguan. First, op…
Replacing the Rear Light Bulb on a Volkswagen Tiguan
Replacing the Rear Light Bulb on a Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today's steps will show you how to remove and replace the rear light bulb on a Volkswagen Tiguan. First, open the tailgate and start unscrewing the s…
How to Replace the Reverse Light Bulb on a Tiguan
How to Replace the Reverse Light Bulb on a Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Want to replace the reverse light bulb on a Tiguan? This guide covers the removal of the bulbs in the rear light. To remove the rear light bulbs, you…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos