Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb on a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light bulb

See other generations:
Video tutorial

Today's steps will show you how to remove and replace the rear light bulb on a Volkswagen Tiguan. First, open the tailgate and start unscrewing the side fixing screws of the rear light, disconnecting the electrical connector found at the back to remove it. Then, remove the bulb holder to access the stop bulbs, as shown in the video.

Now, replace any faulty bulbs with new ones of the correct type and with the same fitting; finally, reinstall the rear light onto the bodywork!


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light on the Volkswagen Tiguan
Replacing the Rear Light on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Let's look at the instructions that will guide us through the process of dismantling and replacing the rear light on the Volkswagen Tiguan. First, op…
How to Replace the Rear Light Bulbs on a Volkswagen Tiguan
How to Replace the Rear Light Bulbs on a Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Do you want to replace the rear light bulbs on your Volkswagen Tiguan? Here’s how to proceed with the disassembly. First, open the boot and remove th…
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Replacing the Reverse Light Bulb on the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Today’s steps will show you how to remove and replace the reverse light bulb on the Volkswagen Tiguan, following the instructions below. First, move …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos