Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Reverse Camera on the Volkswagen

Model: Volkswagen Volkswagen Various

If you intend to customise your vehicle by installing a rear camera, follow the instructions below with the help of the video images. The aftermarket kit includes the camera, connection cables, and display. First, open the boot and unclip the internal plastic panel, position the camera next to the rear number plate light, remove the boot handle, and replace it with the one included in the kit that houses the camera. Route the power cables along the boot pillar and through the corrugated tube to enter the cabin, running them under the roof of the vehicle to the front windscreen pillar, and then bring the cables to the centre console to connect them to the multimedia system to view the camera images.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Bright emblem for Volkswagen cars
Bright emblem for Volkswagen cars
Volkswagen Volkswagen Various In this video, we suggest the installation of a light-up emblem for Volkswagen cars, which however is not suitable for all Volkswagen owners. First o…
How to replace the thermostat on a Volkswagen vehicle
How to replace the thermostat on a Volkswagen vehicle
Volkswagen Volkswagen Various Replacing the thermostat on a Volkswagen vehicle may seem like a complex operation, but with the help of our video tutorial and written guide, you wi…
How to Remove the Thermostat from a Volkswagen Transporter
How to Remove the Thermostat from a Volkswagen Transporter
Volkswagen Volkswagen Various Before you can start, open the front bonnet of your Volkswagen Transporter. Begin by removing the entire air filter assembly and the associated hoses…

    Frequently Asked Questions

    • Volkswagen Vari - What to do when the Volkswagen windshield washer pump does not work? Read answer
    • Volkswagen Vari - What to do when the Volkswagen ignition lock does not turn? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos