Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Volkswagen Golf 5

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008
Part: Car stereo

In this brief guide, follow the steps necessary to remove the radio from a Volkswagen Golf 5, produced from 2003 to 2008. First, using a plastic lever, remove the upper plastic panel above the air vents, then gently pry off the entire air vent panel as shown in the video. Next, unscrew the two screws of the radio fascia and carefully remove it. Finally, unscrew the four screws holding the radio in place and pull it out from its housing, disconnecting all related wiring.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Radio in a Volkswagen Golf
Replacing the Radio in a Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Do you need to replace the radio in a Volkswagen Golf? Here's how to proceed. Turn off the radio, remove the trim using a lever, then use a screwdriv…
How to Reset the Radio in a Volkswagen Golf
How to Reset the Radio in a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …
Remove the Radio from Your Volkswagen Golf
Remove the Radio from Your Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Do you want to remove the radio from your Volkswagen Golf and don't know how? Follow this guide to remove the original stereo. Remove the trim around…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos