|
Do it yourself
| |||
| ||||
How to Remove the Air Vents, Dashboard Buttons, and Light Switch
Model: Volkswagen Golf
Golf IV, MK 4, Golf 4
- Years 1997-2003
This operation takes just a few moments, a bit of attention, and a flat-head screwdriver. Insert the screwdriver tip at the side of the vent and pry it towards the opposite side. Once the internal pin is released, you can pull it out. For the other central and driver's side vents, you can use the same procedure.
To remove the light switch, press the knob. When it clicks, turn it slightly to the left and then clockwise, as shown in the video. At this point, pull it towards you, disconnect the connector, and remove the entire switch block. To remove the brightness adjustment, insert the screwdriver at the side to release the clips and pull it out. Press the connector to disconnect it; then, unscrew the visible screws and pull the plastic frame towards you. To remove the vent frame containing the buttons, located at the centre of the console, unscrew the screws, pull it towards you, and disconnect the connectors. You can now also remove the individual buttons.
Updated on 2 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
Learn how to remove the air vents (side) on a Volkswagen Golf. Use multiple levers to remove the vents. Pry at the top and bottom with the levers (as…
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
Remove the air vents along with the associated pieces (centre console) from a Volkswagen Golf Mk4. Use multiple levers to remove the vents: lever at …
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
Before you begin, sit in the driver's seat of your Volkswagen Golf. Start by prising off and removing the radio trim, then unscrew and remove the scr…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.156
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |