Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper from a Volkswagen Tiguan

Model: Volkswagen Tiguan 5N, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Body

See other generations:
Video tutorial

To remove the bumper from your Volkswagen Tiguan, first, unscrew the four screws located at the sides of the bumper; then remove those holding the wheel arch trim on the rear wheels. There are also two screws on each side at the bottom, and one in the centre.

Two more are located by the number plate. Also, disconnect the clips for the number plate light.

At each step, gently pull the bumper - which is made of synthetic material - away from the metal part of the bodywork, applying enough force to separate the two pieces. Once the metal part is fully exposed, the job is complete.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

Volkswagen Tiguan (2007-2016 / 5N, MK 1) Follow these steps to remove and replace the reverse light bulb and rear bumper on the Volkswagen Tiguan. First, open the boot and start unscrewing t…
Volkswagen Tiguan (2016-2025 / BW, MK 2, AD) Today's instructions will allow us to disassemble and replace the rear bumper of the Volkswagen Tiguan. First, let's open the rear hatch of the trunk…
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Before you can start, open the bonnet of your Volkswagen Tiguan. Begin by unfastening and removing the clips that secure the bumper to the chassis. T…

Other guides you may be interested in

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos