Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touareg
    4. : How to disassemble the door handle of a Volkswagen Touareg

Volkswagen Touareg - Video tutorial

Model: Volkswagen Touareg MK 2, 7P - Years 2010-2018
Part: Handle
Operation: How to disassemble the door handle of a Volkswagen Touareg

Let's see how to disassemble the driver's door handle of a Volkswagen Touareg. We open the door. We will see a gray plastic cap, which we will have to remove. Underneath is a screw. It will be the first screw we will have to unscrew. Then, holding the door open with one hand, we enter with a long enough screwdriver into the hole next to the screw we just unscrewed, where there is another screw. Once this too has been unscrewed, with a plastic spatula, first remove the plastic coating that covers the safety lock, then extract the block of the lock itself, which is now free, again with the help of the plastic spatula. Now we can pull the handle towards us, which is no longer attached to anything.


Posted on 23 May 2023 by ScegliAuto



How to remove the exterior handle on a Volkswagen Touareg
Volkswagen Touareg (2002-2010 / 7L, MK 1) Let's see how to remove the external handle on the door of a Volkwagen Touareg. Insert a special metal key into the slot on the door (remove the rubb
Remove the outside door handle on Volkswagen Touareg MK1
Volkswagen Touareg (2002-2010 / 7L, MK 1) Let's see in this short and simple video how to remove the external rear door handle on a first generation Volkswagen Touareg. First we open the rear
How to remove the door panel of a Volkswagen Touareg
Volkswagen Touareg (2002-2010 / 7L, MK 1) Before starting, we will have to open the door of our Volkswagen Touareg. So let's start by disengaging and removing the door panel pull handle inser

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos