Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulbs on a Volkswagen Polo?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Headlight bulb

As shown in this tutorial, replacing the front headlamp bulbs on a Volkswagen Polo is an extremely simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by opening the bonnet, then using a Torx T30 spanner, remove the two screws located at the top of the headlamp. Next, grasp the headlamp, pull it outwards, and remove it from the vehicle. At this point, disconnect the power connector, remove the large rubber cap, and proceed to replace the faulty bulb.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs on a Volkswagen Polo
How to Replace the Headlight Bulbs on a Volkswagen Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Learn how to replace the headlight bulbs on a Volkswagen Polo. Open the front bonnet by pulling the lever located at the bottom right of the dashboar…
How to Replace the Headlight Bulbs on a VW Polo
How to Replace the Headlight Bulbs on a VW Polo
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Learn how to replace the headlight bulbs on a Volkswagen Polo. Open the front bonnet by pulling the lever located at the bottom right of the dashboar…
Replacing the Front Headlamp Bulb on a VW Polo
Replacing the Front Headlamp Bulb on a VW Polo
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) Replace the damaged front headlamp bulbs on the Volkswagen Polo. Lift the bonnet by pulling the lever located at the bottom right of the dashboard an…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos