Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

To reset the service indicator on a Volkswagen Golf Mk6, follow this procedure: first, insert the key into the ignition. Then, press and hold the set button while turning on the ignition.

Wait five seconds, release the set button, and press the button located on the left side of the dashboard for four seconds. At this point, turn off and then turn on the ignition again, and start the engine to check that the reset has been completed successfully.

This procedure is very simple and takes little time to perform, plus no special tools are required.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this brief guide, you will discover the instructions to reset the service light for routine maintenance on the Volkswagen Golf. First, get inside …
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This brief video guide shows you the steps necessary to reset the service light, which indicates the remaining life of the engine oil, on a sixth-gen…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This brief video tutorial shows you how to reset the service light, which indicates the remaining oil life, on a sixth-generation Volkswagen Golf, pr…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2012-2019 - What does the Volkswagen Golf error code P171900 indicate? Read answer
    • Golf 2008-2012 - What does the p171900 fault code indicate, in the Volkswagen Golf? Read answer
    • Golf 2019-2026 - How to reset the Volkswagen Golf Infotainment system? Read answer
    • Golf 2008-2012 - What does the fault code 00883 mean in the Volkswagen Golf? Read answer
    • Golf 2012-2019 - What does the Volkswagen Golf error P171900 mean? Read answer
    • Golf 2019-2026 - How to reset the Infotainment system in the Volkswagen Golf 8? Read answer
    • Golf 1997-2003 - What does the DSG error message on the Volkswagen Golf Mk4 mean? Read answer
    • Golf 2012-2019 - What to do when the brake pad warning light comes on on my Golf 7? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos