Do it yourself
Frequently asked questions about cars and motorcycles

What is the Fuse Diagram for the Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Fuse box

If a device in your Volkswagen Golf MK7 suddenly stops working, the first thing to do is check the status of the respective fuses, the diagrams for which are shown in this video. As demonstrated, the first fuse box is located inside the cabin, specifically behind the small glove compartment on the driver's side. The second box is located in the engine bay, right next to the battery. If a fuse is blown, ensure you use a replacement with the same specifications and always work with the vehicle turned off.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today's guide shows the fuse diagram and positioning for the Volkswagen Golf. First, open the bonnet and locate the external fuse box; it is found at…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The fuse box, or rather the fuse boxes, in the 2012 Volkswagen Golf, are two, located on the left end of the dashboard, the first one, and in the eng…
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) The following steps will show us how to access the external fuse box of the Volkswagen Golf. First, we open the car's hood and start removing the pla…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 1997-2003 - Where are the cigarette lighter fuses located in the Volkswagen Golf IV? Read answer
    • Golf 2012-2019 - Where is the Volkswagen Golf 7 Start & Stop fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - What is the Volkswagen Golf Mk5 wiper fuse? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer
    • Golf 2003-2008 - Where is the VW Golf 5 radiator fan fuse located? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos