Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Volkswagen Virtus?

Model: Volkswagen Virtus Polo Sedan MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

In this tutorial, you will learn how to reset the service light on the Volkswagen Virtus. Before proceeding with this simple and quick operation, ensure that you have completed all required maintenance work.

Start by inserting the key but leave it in the initial position, then press and hold the left button located in the center of the dashboard, and simultaneously turn on the instrument cluster. At this point, release the button when the confirmation message appears and press it a second time to complete the operation.

Verify that the procedure was successful by restarting the vehicle.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Volkswagen Virtus Polo Sedan (2018-2025 / MK 1) You can reset the trip odometer on the Volkswagen Virtus by turning on the instrument cluster after inserting the key into the ignition switch: once …
Volkswagen Virtus Polo Sedan (2018-2025 / MK 1) You can reset the Service light on the Volkswagen Virtus by turning on the ignition, inserting the key into the ignition switch: once the ignition is…
Volkswagen Virtus Polo Sedan (2018-2025 / MK 1) You can completely reset the Service light that appears on the instrument cluster of the Volkswagen Virtus by pressing and holding the button with th…

Other guides you may be interested in

How to Replace the Rear Light Bulb on a Citroen C5

To replace the rear light bulb on a 2015 Citroën C5, open the boot of the vehicle and remove the side carpet to access the inside of the light unit. Disconnect the light connector and remove the screw. Take out the light unit and proceed to replace the stop light bulb. Open the light housing and replace the bulb. Follow the same procedure for the right rear light bulb. Once the replacement is complete, refit the light unit, reconnect the connector, and close the side carpet. If the bulb does not work correctly, check the fuse related to the light before replacing it again.

Watch the video!


by ScegliAuto

More videos