Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this short and simple guide, you will see the steps to remove and replace the original radio of the Volkswagen Golf. First, get in the car and start by removing the plastic cover on the sides of the radio, prying it off. Then, disconnect the electrical connector for the hazard light button, as shown in the video.

At this point, use the appropriate extraction tools to remove the radio, disconnecting the wiring at the back.

Then install the new radio, following the video tutorial to the end!


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Removing the Radio from a Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Do you want to replace the radio in a Golf 4? Here’s how to remove it from inside the dashboard and how to fit the new one. Remove the radio using th…
How to Reset the Radio in a Volkswagen Golf
How to Reset the Radio in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …
How to Remove the Radio from a Volkswagen Golf 6
How to Remove the Radio from a Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) If you are experiencing issues with the radio in your Volkswagen Golf Mk6 or simply want to replace it with a new model, this guide is all you need. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos