Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel of the Volkswagen Passat

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Door trim panel

Today, follow this guide on how to remove and replace the front door panel of the Volkswagen Passat. First, open the front door of your car and start unscrewing the fixing screws located under the handle and on the sides of the door panel, removing the plastic caps. Next, remove the small reflector by prying at the sides of the panel to detach and remove it, as shown in the video. Now, disconnect the handle cable and the electrical connector of the switch panel, then install the new door panel!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front door panel on a Volkswagen Passat?
How to remove the front door panel on a Volkswagen Passat?
Volkswagen Passat (2005-2010 / B6, 3C) In this tutorial, you will see how to remove the front door panel on a Volkswagen Passat, a very simple and quick operation. First, open the door in …
How to disassemble the front door panel in the Volkswagen Passat?
How to disassemble the front door panel in the Volkswagen Passat?
Volkswagen Passat (2010-2014 / B7) In this tutorial we can see how to disassemble the front door panel in the Volkswagen Passat, an extremely simple and quick operation. First of all, …
How to disassemble the front door panel of the Volkswagen Passat
How to disassemble the front door panel of the Volkswagen Passat
Volkswagen Passat (2005-2010 / B6, 3C) Today's information will show us how to disassemble and replace the front door panel of the Volkswagen Passat. First, we open the front door of the c…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos