Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Adblue Warning Light on the Volkswagen Sharan

Model: Volkswagen Sharan 7N, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: AdBlue warning light

See other generations:
Video tutorial

If you notice that the Adblue warning light on the instrument cluster of your vehicle is illuminated and the onboard computer indicates the remaining kilometres of range, the following description outlines the necessary procedure to turn off the warning.

First, open the tailgate and locate the plastic panel on the side of the boot.

Then, open the cover and you will find the filler cap for the additive tank underneath. Proceed to top up the liquid at least above the minimum level.

Close the cap and cover, then check that the warning light on the instrument cluster has turned off.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

Volkswagen Sharan (2010-2023 / 7N, MK 2) Today's guide will show you the main steps to reset the AdBlue warning light on a Volkswagen Sharan. When you turn on the instrument cluster, you wil…
Volkswagen Sharan (2010-2023 / 7N, MK 2) These brief and simple instructions will show you how to top up the AdBlue fluid, thereby resetting the warning light, on a Volkswagen Sharan. First,…
Volkswagen Sharan (2010-2023 / 7N, MK 2) To deactivate the AdBlue warning light on a Volkswagen Sharan, first top up with the necessary amount of additive liquid. Once the liquid is added, c…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos