Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Exhaust on the Volkswagen Golf GTI

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Exhaust muffler

See other generations:
Video tutorial

Below are the steps to remove and replace the exhaust on the Volkswagen Golf GTI, following the instructions provided. First, lift the vehicle and begin removing the exhaust silencer by unscrewing the bracket screws; then, remove the catalytic section, including the catalyst, by unscrewing the screws and disconnecting it from the exhaust manifold.

Now, install the new exhaust system compatible with your vehicle; reinstall the catalyst to control CO2 emissions!


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
How to Replace the GTI Badge on the Bodywork of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide, we will see the instructions that will allow us to replace the GTI badge on the bodywork of the Volkswagen Golf. To remove the GTI bad…
Replacing the Timing Chain on the Volkswagen Golf GTI 2.0 TSI
Replacing the Timing Chain on the Volkswagen Golf GTI 2.0 TSI
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's guide will illustrate the main steps for removing and replacing the timing chain on the Volkswagen Golf GTI 2.0 TSI. First, open the bonnet a…
How to Remove the Rear Seats from a Volkswagen Golf GTI
How to Remove the Rear Seats from a Volkswagen Golf GTI
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) This guide briefly explains how to remove and replace the rear seats from a Volkswagen Golf GTI, following these simple steps. First, open the rear d…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos