Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Volkswagen Sharan

Model: Volkswagen Sharan 7M, MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you will see how to replace the pollen filter on a Volkswagen Sharan. The first step is to purchase a new pollen filter.

Next, get inside the vehicle, turn off the engine, and pull the handbrake. Pull the bonnet release lever, lift the bonnet, and secure it with the prop rod. Remove the cover located at the top of the engine bay; unscrew the fasteners of the plastic panel as shown in the video and press the pollen filter latch to release it; remove the pollen filter from its housing and clean the housing.

Position the new filter according to the airflow direction indicated by the arrows.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Filter in the Volkswagen Sharan 2.0 TDI
How to Replace the Diesel Filter in the Volkswagen Sharan 2.0 TDI
Volkswagen Sharan (2010-2023 / 7N, MK 2) This guide provides instructions for removing and replacing the diesel filter in the Volkswagen Sharan 2.0 TDI. First, open the bonnet of the vehicle…
How to Replace the Air Filter on a 2016 Volkswagen Sharan
How to Replace the Air Filter on a 2016 Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) To replace the air filter in your 2016 Volkswagen Sharan, follow these simple steps. First, switch off your vehicle and ensure it is parked safely. N…
How to replace the cabin air filter of the Volkswagen Sharan
How to replace the cabin air filter of the Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) To replace the cabin air filter of your Volkswagen Sharan on your own, you need to follow all the following steps. First of all, purchase a new air f…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos