Do it yourself
Frequently asked questions about cars and motorcycles

How to Eliminate Noises from the Dashboard of a Volkswagen T-Cross

Model: Volkswagen T Cross MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Dashboard

Video tutorial

In this video, see how to eliminate the noise coming from the dashboard of a Volkswagen T-Cross. This noise usually comes from the right side, where the plastic of the pillar intersects with the plastic of the dashboard.

The problem is easily solved with minimal cost by purchasing some foam, cutting it to a width of one centimetre and the length of the pillar. With the door open and using a plastic tool, such as a card (avoid using your bank card), push it into the gap. The result will eliminate any creaking noises from the plastics in the car, and the cost will be very low.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Volkswagen T Cross (2019-2026 / MK 1) .. the tyre pressure sensors on a Volkswagen T-Cross. Before resetting the TPMS, ensure that all four tyres are at the correct operating pressure. Then,.. …
Volkswagen T Cross (2019-2026 / MK 1) .. tire pressure warning light of the Volkswagen T-Cross by adjusting all tires to the correct inflation pressure, indicated on the sticker inside the driver's.. …
Volkswagen T Cross (2019-2026 / MK 1) If you want to change the engine oil and filter on this model as per the maintenance manual, you must complete the job by resetting and updating the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos