Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volkswagen T-Cross

Model: Volkswagen T Cross MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Warning light – error code

Video tutorial

If you want to change the engine oil and filter on this model as per the maintenance manual, you must complete the job by resetting and updating the service indicator that is illuminated on the instrument panel. Follow the instructions below.

First, enter the cabin and with the ignition off, press and hold the button located at the bottom left of the dashboard, then turn on the ignition. Press the same button again and then press the button immediately to the right to reset the light.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Volkswagen T-Cross?
How to Reset the Service Light on the Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. On the Volkswagen T-Cross, to reset the Service light, turn on the instrument panel and press and hold the OK button located.. …
How to Reset the Service Light on a Volkswagen T-Cross?
How to Reset the Service Light on a Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. how to reset the service light on a Volkswagen T-Cross. This operation is very simple and should only be performed after completing all required maintenance.. …
How to reset the Service light on the Volkswagen T-Cross?
Volkswagen T Cross (2019-2026 / MK 1) .. To reset the Service light on the Volkswagen T-Cross, turn on the ignition and press and hold the OK button located on the right side of the steering.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos