Do it yourself
Frequently asked questions about cars and motorcycles

Wiper Blade Replacement

Model: Volkswagen Jetta MK 5, A5 - Years: 2005, 2006, 2007, 2008, 2009, 2010
Part: Windshield wipers

See other generations:
This video is currently unavailable

Replacing these wiper blades is extremely simple as the blade is mounted on a plastic pin and held in place by a side tab: there are no hooks or clips to detach; therefore, lift the wiper arm, rotate the blade 90 degrees, and slide it sideways to remove it from the pin; then insert the new blade onto the pin, orienting it perpendicular to the wiper arm, before rotating it and securing it in place with the side tab; repeat the same steps for the other blade.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Volkswagen Jetta (2005-2010 / MK 5, A5) This video illustrates how to remove and replace the wiper blades on your car. If operating the wiper blades still leaves your windscreen dirty or if…
Volkswagen Jetta (2010-2018 / MK 6, A6) When the phone charger in the 2017 Volkswagen Jetta stops working, it means that the corresponding fuse has blown, in these cases it is necessary to …
Volkswagen Jetta (2010-2018 / MK 6, A6) When the cigarette lighter of the 2018 Volkswagen Jetta stops working, it is necessary to replace the corresponding fuse. The fuse to be replaced is …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos