Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Volkswagen Tiguan

Model: Volkswagen Tiguan BW, MK 2, AD - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light

See other generations:
Video tutorial

To remove the rear light of a Volkswagen Tiguan, open the bonnet to access the interior of the boot. Corresponding to the light you want to remove, you will find a plastic panel that needs to be removed.

After removing the panel, you can unscrew the knobs located inside, which, once fully loosened, will allow you to pull the light from its housing. After disconnecting the connector, you can connect the new light, inserting it into its housing and securing it with the knobs.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light of the Volkswagen Tiguan
How to Replace the Rear Light of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) In this guide, follow the instructions to remove and replace the rear light and its bulbs on the Volkswagen Tiguan. First, open the boot and start un…
How to Remove the Rear Light on a Volkswagen Tiguan?
How to Remove the Rear Light on a Volkswagen Tiguan?
Volkswagen Tiguan (2007-2016 / 5N, MK 1) To remove the rear light on a Volkswagen Tiguan, open the tailgate to access the side protection panel next to the light. Once this panel is removed,…
How to replace the rear light of the Volkswagen Tiguan
How to replace the rear light of the Volkswagen Tiguan
Volkswagen Tiguan (2007-2016 / 5N, MK 1) Below, we will see the process of removing and replacing the bulbs of the rear light and the two bulbs of the Volkswagen Tiguan. First, open the tail…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos