|
Do it yourself
| |||
| ||||
How to Fix Manual Gearbox Problems on the Volkswagen Golf V and VI
Model: Volkswagen Golf
MK 5, Golf 5, Golf V
- Years 2003-2008
In this video, you will learn how to resolve the common issues with the manual gearbox of the Volkswagen Golf V and VI. The problem arises because even after changing the clutch and release bearing, the issue persisted. Therefore, the focus shifted to the primary shaft of the gearbox, which has a large thrust bearing at its end. The play that has developed between the parts is excessive, so you should replace the bearing and the bush to restore the original tolerance of the bush fitted in the cover of the box within which the bearing of the primary shaft rotates. The wear of the parts has caused the couplings to go out of tolerance, increasing both axial and radial play, resulting in the shaft operating in a misaligned condition, generating vibrations and noise easily confused with those produced by a damaged flywheel. Unfortunately, these spare parts are only available from the Volkswagen network, although the cost is not excessive.
Updated on 2 August 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Volkswagen Golf
(1997-2003 /
Golf IV, MK 4, Golf 4)
Today we will see the instructions that allow us to solve any problems with the immobilizer of the Volkswagen Golf. The immobilizer is an electrical …
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
This guide outlines the steps to change the manual gearbox oil on a Volkswagen Golf. First, lift the vehicle and begin by removing the plastic engine…
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
This guide will show you how to remove and replace the gear knob on the manual gearbox of a Volkswagen Golf in simple steps. First, get into the vehi…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.835
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |