Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Car Radio from a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will see how to remove the car radio from a Volkswagen Golf 7, a very simple and quick operation. First, unclip the frame by gripping it from the lower joint, then insert the special key, or an equivalent tool, into the indicated slot, lever with a spatula, and release the internal lock.

Repeat this for all corners, and once done, pull the entire unit towards you, extracting it from the dashboard. At this point, disconnect all the rear connectors and fit the replacement if necessary.


Updated on 3 August 2026 by ScegliAuto


Related tutorials

How to Remove and Replace the Radio on a Volkswagen Golf Mk5
How to Remove and Replace the Radio on a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this video tutorial, follow the steps to remove the original radio from a Volkswagen Golf Mk5, so it can be replaced with an Android radio. First,…
How to Remove the Standard Radio from a Volkswagen Golf
How to Remove the Standard Radio from a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Follow these simple and quick steps to remove and replace the standard radio from a Volkswagen Golf. First, get inside the vehicle; to extract the ra…
How to Reset the Radio in a Volkswagen Golf
How to Reset the Radio in a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) To reset a "composition media" radio in a Volkswagen, this video is demonstrated on a Volkswagen Golf, but it can be found in other Volkswagen group …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos