Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Volkswagen Transporter T6

Model: Volkswagen Transporter T6, MK 6 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

As we can see in this short video guide today, resetting the service light on a Volkswagen Transporter T6 is an easy operation accessible to everyone. First, with the engine still off, turn on the hazard lights, then press and hold the "SET" button on the right side of the speedometer and turn on the vehicle's ignition.

Once done, you will see a request on the information display to reset the maintenance; confirm with the appropriate button located on the right side of the steering wheel. Finally, turn off and restart the vehicle to verify the correct reset of the service light.


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on a Volkswagen Transporter.
How to reset the service light on a Volkswagen Transporter.
Volkswagen Transporter (2003-2014 / T5, MK 5) Let's briefly go over the instructions that will allow us to reset the service light for regular maintenance on the Volkswagen Transporter. First, le…
How to Reset the Service Light on a VW Transporter
How to Reset the Service Light on a VW Transporter
Volkswagen Transporter (2014-2025 / T6, MK 6) On Volkswagen Transporter T6 models, the service light reset can be performed via the OBD port and a diagnostic computer or manually through the vehi…
How to reset the maintenance light (service) on the Volkswagen Transporter
How to reset the maintenance light (service) on the Volkswagen Transporter
Volkswagen Transporter (1990-2003 / MK 4, T4) Below we will see how to reset the ordinary maintenance (service) light of the Volkswagen Transporter. First, we get inside the vehicle and start pre…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos